English
Umfanekiso obonisiweyo woMatshini wokuQondisa iiRobotic Screw
  • Umatshini Wokubopha Isikrufu Serobhothi
  • Umatshini Wokubopha Isikrufu Serobhothi
  • Umatshini Wokubopha Isikrufu Serobhothi
  • Umatshini Wokubopha Isikrufu Serobhothi

Umatshini Wokubopha Isikrufu Serobhothi

Inkcazo emfutshane:

Imodeli:MS-PC-DS5441-SP

Isondli imo: UkuvuthelaUhlobo

Ubungakanani (L*W*H) (mm): 700*580*650mm

Ubunzima (kg):45 kg

Uluhlu Lokusebenza (X*Y*Z) (mm): 380*365*65mm


Iinkcukacha zeMveliso

Iithegi zeMveliso

Ividiyo

Iingenelo

Irobhothi Yokubopha Izikrufu iphucula kakhulu ukusebenza kakuhle kunye nokuhambelana nokuthembeka kokubambelela kwezikrufu. NgePendant yokufundisa ephucukileyo, abaqhubi banokuzilungiselela ngokwabo zonke iiparameter zenkqubo ezifana ne-screw coordinate kunye neentlobo zezikrufu, njl. Ingaqhelana nazo zonke iintlobo zenkqubo enzima yokubambelela kwizikrufu kwaye ifezekise ukwenziwa ngokuzenzekelayo okupheleleyo.

Lo matshini wokubopha werobhothi wenzelwe ukubopha ngokuzenzekelayo izikrufu kunye nezinye izinto. Unesakhiwo esivalekileyo esine-sensor yekhethini enokuqaphela imiqobo kwindawo yokusebenza kwaye ilungise isantya serobhothi ngokufanelekileyo. Umatshini uxhotyiswe ngesixhobo sombane sokubopha ngokuzenzekelayo, kunye ne-feeder ezenzekelayo yokufaka izikrufu kwindawo yokusebenza. Umatshini unako ukusebenza ngobukhulu obahlukeneyo kunye neentlobo zezikrufu, kwaye ufanelekile kwiintlobo ngeentlobo zezicelo zoshishino.

Iimbonakalo

1. Izikrufu ziza kutyibilika ngqo kwi-screwdriver nganye nganye ngetyhubhu, ukuze zikhawuleze kakhulu ukondla nokukrufula.

2. Umsebenzisi angasebenzisa indawo yokubeka ngesandla ukwenza ucwangciso. Isebenza kakuhle kakhulu kwaye kulula kakhulu ukuyifunda loo msebenzi.

3. Ngomsebenzi we-alamu wokubopha ongekhoyo, izikrufu ezingaqiniswanga, intambo egugileyo, njl.njl.

4. Inkxaso yomsebenzi wokuqalisa ukusebenza kokuzibona ngokuzenzekelayo.

5. Ngetafile yokusebenza engaguqukiyo, indawo yokusebenza inokulungiswa ngokulula.

6. Kulula ukuyisebenzisa nokuyigcina ikwimeko entle, kwaye ibonelela ngokuchaneka okugqwesileyo kokubambelela kunye nokuphindaphinda.

Izicelo

Ifanelekile kuzo zonke iintlobo zenkqubo yokubopha izikrufu kwiifowuni eziphathwayo, iibhodi zezitshixo, iimonitha, izixhobo zeemoto, amathoyizi, izixhobo zombane ezincinci zasekhaya, iisekethe ezidibeneyo, iibhodi zesekethe eziprintiweyo, isikrini se-LCD, izinto ze-elektroniki (ezifana neerelayini, izithethi), njl.njl.

Iiparameters

Imodeli CLYY4441
Imo yesondlo Uhlobo lokuvuthela
Ubungakanani (L*W*H) (mm) 700*580*650mm
Ubunzima (kg) 45 KG
Uluhlu Lokusebenza (X*Y*Z) (mm) 380*365*65mm
Ixesha lokuskrola isikrufu ngasinye 1.0~1.2s/iqhekeza
Ubungakanani besikrufu obufanelekileyo M1.5 - M4 (ubude be-screw iyonke ≤ 20mm)
Isantya esiphezulu X,Y 600mm/S, Z 500mm/S
Ukuchaneka kokuphindaphinda X,Y,Z ±0.02mm
Indlela Yokufundisa Ukufundisa Kude/Ukufaka Idatha Ngesandla/Ukhetho: Isikrini Sokuchukumisa seLCD
Inkqubo yemoto imoto yokunyathela echanekileyo
Imo yokuqhuba I-Precision Stepping Motor + Ibhanti yeXesha
Iphaneli yokulawula I-Teach pendant (ukhetho: iPC okanye iTouch Screen)
Uphawu lwe-screwdriver I-Taiwan DG / i-Japan HIOS
Uluhlu lweeTorque 0.5~15kgf.cm (ingalungiswa)
Qinisa ukusebenza kakuhle Malunga ne-60pcs/min (ngokohlobo lwesikrufu)
I-Voltage I-AC 110V/220V,50Hz/60Hz
Ujongano lwangaphandle I-USB + RS232
Umthombo wamandla Umbane + Umoya
Imfuneko yoxinzelelo lomoya 0.4 ukuya kwi-0.6MPa (4 ukuya kwi-6kg/cm2) njengomoya owomileyo
Ubushushu bokusebenza 5-40C°
Ukufuma okusebenzayo 20-90% RH

Iinkcukacha zeMveliso

i-avabab (1)
i-avabab (3)
i-avabab (2)
  • Ngaphambili:
  • Okulandelayo:
    • Inkcazo
    into
    ixabiso
    Indawo yemvelaphi
    iTshayina
    IGuangdong
    Igama lebrand
    MINGSHUO
    Imeko
    Entsha
    Ubunzima (KG)
    400
    Ukuhlolwa kwevidiyo okuphumayo
    Kubonelelwe
    Ingxelo yoVavanyo loMatshini
    Kubonelelwe
    Uhlobo loThengiso
    Imveliso Eqhelekileyo
    Iwaranti yezinto eziphambili
    Unyaka o-1
    Izinto ezingundoqo
    I-PLC, Injini, Ukuthwala, Imoto, Iigiya
    Iwaranti
    Unyaka o-1
    Amashishini afanelekileyo
    Isityalo Sokuvelisa, Iivenkile Zokulungisa Oomatshini, Ezinye
    Indawo yeShowroom
    Akukho nanye
    Uhlobo
    Yenzelwe wena
    Igama lemveliso
    Umatshini wokuluka ngentambo
    I-Voltage
    I-AC 110V/220V,50Hz/60Hz
    Uphawu
    Ubuchule obuphezulu
    Isicelo
    Izixhobo zokuZenzekelayo

     

    Into Inkcazo Umxholo
    1 Umsebenzi weZixhobo a. Ucingo oluqengqelekayo, ukondla ngokuzenzekelayo.
    b. Izixhobo ezizisika ngokuzenzekelayo, ezixobulayo, ezincamathelayo, ezidiphiweyo ngetin, kunye nezolukiweyo ngokuzenzekelayo (Ukuwelda kweengcingo ezi-1-4 akunyanzelekanga).
    c. Ingafikelela ekutshintsheni ngokukhululekileyo kweengcingo ezinemibala emi-4.
    d. Ukuwelda kwicala elinye, ukuwelda ngee-angle ezininzi (Onganyanzelekanga).
    e. Emva kokuwelda, i-engile yokuthambekela kwentambo yi-0-25 °.
    2 Umthamo wemveliso kunye neziphene Malunga neengcingo ezingama-3000~4000 ezidityanisiweyo ngeyure.
    3 Iimfuno zobungakanani bebhodi ye-PCBA Ingasetyenziswa ngaphakathi koluhlu lwe-166-210mm.
    4 Iimfuno zezinto ezijikeleze ibhodi yesolder a. Ukuphakama kwecandelo: Ngaphakathi koluhlu lwebhodi yesolder oluyi-1mm, akukho candelo lingaphezulu kwe-2.6mm livumelekileyo (Ngaphandle kweemeko ezikhethekileyo).
    b. Ubungakanani bebhodi yePCB: 1.5-3mm.
    c. Indawo yebhodi ye-PCB: Yonke ingaphakathi koluhlu lwe-PCB (Ngaphandle kweemeko ezikhethekileyo)
    5 Umgama wokuxobula 1. Ucingo olufutshane lokuxobula: 13mm.
    2. Ubude obukhulu bokuxobuka: 170mm.
    3. Ubude bokuxobuka: ulusu lwentambo oluyi-2-4mm.

     

    Iingenelo zezixhobo:
    1. Ubuninzi bezixhobo: phantse zonke iimveliso ezihlangabezana neemfuno zokuhamba zokuxobula nokusika iingcingo, kunye nezo zingomiyo ngexesha lokudityaniswa kwentsimbi, zingasetyenziswa ngokubanzi.

    2. Iimveliso ezicutshungulwayo zinobungqingqwa obuphezulu: ukusika, ukuxobula, kunye nokuwelda zonke zigqitywa ngokuzenzekelayo zizixhobo, kwaye ubude bentambo kunye nokugcwala kweendawo zokudibanisa phakathi kweemveliso kuya kufana.

    3. Ukonga abasebenzi: Umqhubi anganceda ekulayisheni nasekukhupheni izinto rhoqo, umntu omnye ekwazi ukunyamekela izixhobo ezi-2 ukuya kwezi-3, ngaphandle kwesidingo sabasebenzi abanobuchule bokutywina. Abasebenzi abaqhelekileyo banokujonga umatshini.

    4. Ukusebenza kakuhle: Izixhobo zokucwangcisa eziphakathi ezineentambo ezimbini zokuwelda ngaxeshanye zinokuwelda iingcingo ezingama-2100 ngeyure. Izixhobo zokucwangcisa eziphezulu ezineentambo ezine zokuwelda ngaxeshanye zinokuwelda iingcingo ezingama-3600 ngeyure.

    Iimveliso eziNxulumeneyo