English
Umatshini wokunyibilikisa ozenzekelayo weBenchtop Umfanekiso obonisiweyo
  • Umatshini wokunyibilikisa ozenzekelayo weBenchtop
  • Umatshini wokunyibilikisa ozenzekelayo weBenchtop
  • Umatshini wokunyibilikisa ozenzekelayo weBenchtop
  • Umatshini wokunyibilikisa ozenzekelayo weBenchtop
  • Umatshini wokunyibilikisa ozenzekelayo weBenchtop
  • Umatshini wokunyibilikisa ozenzekelayo weBenchtop

Umatshini wokunyibilikisa ozenzekelayo weBenchtop

Inkcazo emfutshane:

Oomatshini bokutywina benchtop bancinci, bangabizi kakhulu kwaye bacotha kuneerobhothi, kodwa bafanelekile ngakumbi kwiiprojekthi ezincinci. Iirobhothi zokudibanisa zinkulu kwaye zibiza kakhulu, kodwa ziyakwazi ukwenza imisebenzi enzima yokudibanisa ngokukhawuleza nangokufanelekileyo.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Ividiyo

Iimpawu zeMveliso

▶ Isebenza kwiimveliso ezahlukeneyo, ubushushu bokutywina bunokubekwa ngokukhululekileyo. 2. Iyunithi yesinyithi sokutywina inokulungiswa ngeendlela ezininzi, nto leyo enokukhusela i-PCB kunye nezinto ezonakeleyo.

▶ Ubushushu obulawulwa ngamanani (imeko yomoya engashukumiyo: ±1ºC).

▶ Nge-LCD Teaching Pendant ephathwayo, ucwangciso lulula kwaye kulula ukulifunda.

▶ Kwinkqubo yokunyibilikisa, incam yesolder inokubuyiselwa kobushushu ngokukhawuleza kwaye ihlala ixesha elide.

Iiparameter zeMveliso:

Imodeli GM-PT-HX5331D
Amandla okufudumeza 150~300W
Uluhlu lobushushu bokufudumeza 0ºC~550ºC
Ububanzi beWire yeSolder 0.5, 0.6, 0.8, 1.0, 1.2 (mm)
Uluhlu Lokusebenza (X*Y*Z) (mm) 480*280*80mm
Izembe I-4Axis (X,Y1,Y2,Z)
Isantya esiphezulu X,Y 500mm/S, Z 300mm/S
Ukuchaneka okuphindaphindwayo X,Y,Z ±0.02mm
Indlela Yokufundisa Ukufundisa Kude/Ukufaka Idatha Ngesandla/Ukhetho: Isikrini Sokuchukumisa seLCD
Inkqubo yemoto imoto yokunyathela echanekileyo
Imo yokudlulisa I-Precision Stepping Motor + Ibhanti yeXesha
Iphaneli yokulawula I-Teach pendant (ukhetho: iPC okanye iTouch Screen)
I-Voltage I-AC 110V/220V,50Hz/60Hz
Ujongano lwangaphandle I-USB + RS232
Umthombo wamandla Umbane + Umoya
Imfuneko yoxinzelelo lomoya 0.4 ukuya kwi-0.6MPa (4 ukuya kwi-6kg/cm2) njengomoya owomileyo
Ubungakanani (L*W*H) (mm) 820*600*800mm
Ubunzima (kg) 65 KG
Ubushushu bokusebenza 5-40C°
Ukufuma okusebenzayo 20-90% RH

Iinkcukacha zeMveliso

umatshini wokunyibilikisa irobhothi (1)
umatshini wokutywina werobhothi (2)

Ngathi

Ukususela oko yasekwa ngo-2008, iDongguan Gongming Automation Technology Co.Ltd. izinikele kuphando oluqhelekileyo nolungekho semgangathweni oluzenzekelayo, ukuvelisa, ukuthengisa kunye nokubonelela ngenkonzo kubathengi. Izinikele ekunikezeni ulawulo oluzenzekelayo lwezisombululo zizonke zonyango, iiselfowuni, iikhamera, ukwenziwa kweemoto, izixhobo zasekhaya ezincinci, amathoyizi, ii-semiconductors kunye nezinye iimveliso zedijithali ze-elektroniki. I-Mingshuo SmartManufacturing yenye yeempawu zenkampani ezineenkqubo ezininzi zemveliso. Ibandakanya umatshini we-3C common platform vision screw machine, i-special type screw, i-special screw kunye nezinye izixhobo zokutshixa izikrufu ezenzelwe wena, umatshini we-medicalflat mask, umatshini we-civilian mask olahlwayo, irobhothi yokutshixa ezenzekelayo, imigca yemveliso yovavanyo olukrelekrele lwe-ICT/FCT/ATE, izixhobo zokupakisha ze-semiconductor, oomatshini bokujika bemagnethi kunye nezinye oomatshini abangekho semgangathweni.

Iworkshop-1
malunga ne-img

FAQ

1. Q: INJANI INKONZO YAMVA KWENTENGO?
A: Sinikezela ngewaranti yonyaka omnye kunye nenkxaso yobugcisa. Zonke iindawo zomatshini zingatshintshwa simahla kungakapheli unyaka omnye ukuba ziphukile (ngaphandle kokusebenza kwempazamo).

2. Q: NGABA KUNZIMA UKUFAKA UMGANYANO WE-TNE?
A: Indawo yokusebenzela kufuneka ilungiselele iseti epheleleyo yezixhobo ezifana nombane kunye ne-air compressor. Kwindawo yokuqala yokufakela, sinikezela ngoqeqesho olukwi-intanethi. Kwiingxaki ezingakumbi, singabonelela ngemiyalelo yevidiyo.

3. Q: LIXESHA LOKUQHUBA NGOMSHINI ELINGANI?
A: Kwiimashini ezisemgangathweni, singazisa ngaphakathi kweentsuku ezi-3 ~ 7, ukuba zenziwe ngokwezifiso ngumthengi (OEM), ixesha lokukhokela yiintsuku ezingama-35 ~ 55.

4. U: INGABA UYABONISA NGOKWENZIWEYO?
A: Ewe, singayila izixhobo ngokweenkcukacha zecandelo lesakhiwo olinikezelayo. Singabayili boomatshini abanobuchule bokwenza isinyithi kunye nomenzi.

5. Q: UNGINGUMNYANGO WORHWEBO OKANYE NGUMFIHLO?
A: Singabenzi.

6. Q: UNGAYITYELELA NJANI INKAMPANI YAKHO?
A: Umzi-mveliso wethu ukwiphondo laseGuangdong. Nceda undazise umhla wokutyelela kwangaphambili, singakuthatha kwisikhululo seenqwelo-moya okanye kwisikhululo sikaloliwe.

  • Ngaphambili:
  • Okulandelayo:
    • Inkcazo
    into
    ixabiso
    Indawo yemvelaphi
    iTshayina
    IGuangdong
    Igama lebrand
    MINGSHUO
    Imeko
    Entsha
    Ubunzima (KG)
    400
    Ukuhlolwa kwevidiyo okuphumayo
    Kubonelelwe
    Ingxelo yoVavanyo loMatshini
    Kubonelelwe
    Uhlobo loThengiso
    Imveliso Eqhelekileyo
    Iwaranti yezinto eziphambili
    Unyaka o-1
    Izinto ezingundoqo
    I-PLC, Injini, Ukuthwala, Imoto, Iigiya
    Iwaranti
    Unyaka o-1
    Amashishini afanelekileyo
    Isityalo Sokuvelisa, Iivenkile Zokulungisa Oomatshini, Ezinye
    Indawo yeShowroom
    Akukho nanye
    Uhlobo
    Yenzelwe wena
    Igama lemveliso
    Umatshini wokuluka ngentambo
    I-Voltage
    I-AC 110V/220V,50Hz/60Hz
    Uphawu
    Ubuchule obuphezulu
    Isicelo
    Izixhobo zokuZenzekelayo

     

    Into Inkcazo Umxholo
    1 Umsebenzi weZixhobo a. Ucingo oluqengqelekayo, ukondla ngokuzenzekelayo.
    b. Izixhobo ezizisika ngokuzenzekelayo, ezixobulayo, ezincamathelayo, ezidiphiweyo ngetin, kunye nezolukiweyo ngokuzenzekelayo (Ukuwelda kweengcingo ezi-1-4 akunyanzelekanga).
    c. Ingafikelela ekutshintsheni ngokukhululekileyo kweengcingo ezinemibala emi-4.
    d. Ukuwelda kwicala elinye, ukuwelda ngee-angle ezininzi (Onganyanzelekanga).
    e. Emva kokuwelda, i-engile yokuthambekela kwentambo yi-0-25 °.
    2 Umthamo wemveliso kunye neziphene Malunga neengcingo ezingama-3000~4000 ezidityanisiweyo ngeyure.
    3 Iimfuno zobungakanani bebhodi ye-PCBA Ingasetyenziswa ngaphakathi koluhlu lwe-166-210mm.
    4 Iimfuno zezinto ezijikeleze ibhodi yesolder a. Ukuphakama kwecandelo: Ngaphakathi koluhlu lwebhodi yesolder oluyi-1mm, akukho candelo lingaphezulu kwe-2.6mm livumelekileyo (Ngaphandle kweemeko ezikhethekileyo).
    b. Ubungakanani bebhodi yePCB: 1.5-3mm.
    c. Indawo yebhodi ye-PCB: Yonke ingaphakathi koluhlu lwe-PCB (Ngaphandle kweemeko ezikhethekileyo)
    5 Umgama wokuxobula 1. Ucingo olufutshane lokuxobula: 13mm.
    2. Ubude obukhulu bokuxobuka: 170mm.
    3. Ubude bokuxobuka: ulusu lwentambo oluyi-2-4mm.

     

    Iingenelo zezixhobo:
    1. Ubuninzi bezixhobo: phantse zonke iimveliso ezihlangabezana neemfuno zokuhamba zokuxobula nokusika iingcingo, kunye nezo zingomiyo ngexesha lokudityaniswa kwentsimbi, zingasetyenziswa ngokubanzi.

    2. Iimveliso ezicutshungulwayo zinobungqingqwa obuphezulu: ukusika, ukuxobula, kunye nokuwelda zonke zigqitywa ngokuzenzekelayo zizixhobo, kwaye ubude bentambo kunye nokugcwala kweendawo zokudibanisa phakathi kweemveliso kuya kufana.

    3. Ukonga abasebenzi: Umqhubi anganceda ekulayisheni nasekukhupheni izinto rhoqo, umntu omnye ekwazi ukunyamekela izixhobo ezi-2 ukuya kwezi-3, ngaphandle kwesidingo sabasebenzi abanobuchule bokutywina. Abasebenzi abaqhelekileyo banokujonga umatshini.

    4. Ukusebenza kakuhle: Izixhobo zokucwangcisa eziphakathi ezineentambo ezimbini zokuwelda ngaxeshanye zinokuwelda iingcingo ezingama-2100 ngeyure. Izixhobo zokucwangcisa eziphezulu ezineentambo ezine zokuwelda ngaxeshanye zinokuwelda iingcingo ezingama-3600 ngeyure.

    Iimveliso eziNxulumeneyo